Notebook

3 Things You Need to Consider When Deciding on EGR Gasket Material

EGR (exhaust gas recirculation) valves serve a specific purpose in engines. They recirculate exhaust gases from the exhaust stream, sending some back into the engine to be burned again.  This helps to reduce emissions by further burning the byproducts of combustion.

EGR valves can be can be  thermally operated or electrically operated. Generally, there is an operating mechanism that “opens” and an actuator mechanism that makes it do so. Older style EGR’s had more mechanical operation driven by heat to open the valve. More recent styles feature electrically operated valves.

EGR

What Material Should You Use?

If you are involved with making the decision on EGR gasket material, there are 3 main items of consideration.

1. Temperature Involved

EGR by nature is a hot application. Designers need to know the temperature exposure that a EGR seal point would see to determine what material to use. Generally a metal-reinforced material is the proper solution. If high temps (>1000°F), a mechanically clinched product is best.  Over the years, flexible graphite has been an excellent solution in this area. High temp fiber products have also shown good performance and offer insulative properties as well.

2. Flange Load

Generally, EGR valve flanges feature stiff flanges and 2 sufficient bolts. This is usually adequate for a tanged metal composite gasket (either graphite or high temp facing) to seal both initially and long term. For joints where less flange load is available and temperatures are not as high, a solid core graphite design might be considered.

3. Insulate or Conduct

The thermal question is the key. With the exposure to high temperature always present, the control part of the valve needs to be protected or isolated from the heat. In many cases, designers prefer an insulative material to accomplish that task.

Decide on a Material

EGR valve gasket applications are an excellent candidate for metal-reinforced, high temperature gasket material.

If you have any questions about your EGR application, please let us know!

Metal Tech manufactures HT400, and has had much success with it over the years in EGR valve gasket applications. The HT400 offers thermally insulative properties to reduce heat flow and protect the components, while maintaining an effective seal.

Aftertreatment

Follow MTI

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.